Click here

INJECTOR DRIVER INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL INJECTOR DRIVER

    Note:

    Be careful not to drop or strike the injector driver.


    1. w/ DPF:

      Install the No. 2 injector driver to the No. 2 injector driver bracket with the 4 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf

    2. w/o DPF:

      Install the No. 2 injector driver and injector driver bracket to the No. 2 injector driver bracket with the 4 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf

    3. w/ DPF:

      Install the No. 1 injector driver to the No. 1 injector driver bracket with the 4 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf

    4. w/o DPF:

      Install the No. 1 injector driver and injector driver bracket to the No. 1 injector driver bracket with the 4 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf

    5. Install the No. 2 injector driver bracket to the No. 1 injector driver bracket with the 2 bolts.

      3.0 N*m 31 kgf*cm 27 in.*lbf

    6. w/ DPF:


      1. Install the injector driver assembly with the 3 bolts.

        8.0 N*m 82 kgf*cm 71 in.*lbf

      2. Install the ground wire to the No. 2 injector driver bracket with the bolt.

        8.4 N*m 85 kgf*cm 74 in.*lbf

      3. Connect the 7 injector driver connectors and attach the 2 wire harness clamps.

    7. w/o DPF:


      1. Install the injector driver assembly with the 3 bolts.

        8.0 N*m 82 kgf*cm 71 in.*lbf

      2. Attach the fuel hose clamp and wire harness clamp.

      3. Connect the 4 injector driver connectors.

      4. Install the ground wire to the No. 1 injector driver bracket with the bolt.

        8.4 N*m 85 kgf*cm 74 in.*lbf
  2. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


    1. Connect the cables to the negative (-) main battery and sub-battery terminals.