Click here

FUEL FILTER INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT FUEL FILTER ASSEMBLY


    1. Inspect the level warning switch.


      1. A0155S8E01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Float upper end position Below 1 Ω
        1 - 2 Float lower end position 1 MΩ or higher

        If the result is not as specified, replace the fuel filter assembly.

    2. Inspect the clogging switch.


      1. A015B70E01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) Below 1 Ω

        If the result is not as specified, replace the fuel filter assembly.