AIR PUMP REMOVAL


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. A0159SG

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

  2. REMOVE FRONT FENDER APRON TRIM PACKING A


    1. A015AN4

      Remove the 3 clips and front fender apron trim packing A.

  3. DISCONNECT FRONT FENDER LINER RH


    1. A0155NF

      Remove the screw, and disconnect the liner from the front bumper cover.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Remove the 4 clips.

    4. Partially remove the fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.

  4. REMOVE NO. 3 AIR INJECTION SYSTEM HOSE


    1. A0157QF

      Inside engine room:


      1. Slide the clip and disconnect the No. 3 air injection system hose from the air tube.

      2. Detach the clamp and disconnect the No. 3 air injection system hose from the clamp.

    2. A0159QF

      Inside front fender RH:


      1. Detach the clamp from the air pump bracket.

      2. Slide the clip and remove the No. 3 air injection system hose.

  5. REMOVE AIR PUMP ASSEMBLY


    1. A015DTC

      Disconnect the connector.

    2. Detach the connector clamp from the bracket.

    3. Disconnect the wire harness from the clamp.

    4. A015656

      Remove the 2 bolts, 2 nuts and air pump assembly.

  6. REMOVE AIR PUMP INLET


    1. A015AK3

      Remove the 2 bolts and air pump inlet.

  7. REMOVE NO. 1 AIR INJECTION SYSTEM HOSE


    1. A0158X1

      Remove the No. 1 air injection system hose from the air pump assembly.

  8. REMOVE AIR PUMP


    1. A015C9D

      Detach the 2 clamps from the air pump bracket.

    2. Remove the 3 insulators from the air pump.