FRONT PILLAR UPPER COVER INSTALLATION

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER


    1. Install the front door front lower frame upper cover with the nut.

  2. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01G64Z

      Engage the 2 clips to install the front door lower frame bracket garnish.

  3. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01G7SN

      Install the front door inner glass weatherstrip.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01G600E01
      Text in Illustration
      *1 Front Door Inside Locking Cable Assembly
      *2 Front Door Lock Remote Control Cable Assembly

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    2. w/ Memory:


      1. Connect the connector.

    3. w/ Illumination:


      1. Connect the connector.

    4. A01G54ME01
      Text in Illustration
      *1 Reference Boss

      Engage the front door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

    5. A01G6RQ

      Engage the 11 clips to temporary install the front door trim board sub-assembly.

    6. A01G7VV

      Install the 3 screws to install the front door trim board sub-assembly.

  5. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION


    1. A01G98H

      Install the front door No. 1 stiffener cushion with the screw.

  6. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01G4YVE01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  7. INSTALL DOOR PULL HANDLE COVER


    1. A01G53E

      Install the door pull handle cover.

  8. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. Connect each connector.

    2. A01G6MX

      Engage the 2 guides, 2 clips and 6 claws, to install the multiplex network master switch assembly with front door armrest base panel.

  9. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. Connect each connector.

    2. A01G59M

      Engage the 2 guides, 2 clips and 6 claws, to install the power window regulator switch assembly with front door armrest base panel.

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01G9BK

      Engage the 3 claws to install the front door inside handle bezel plug.