ROOF DRIP SIDE FINISH MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A01G895E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the center roof drip side finish moulding.

    2. A01G6EX

      Using a moulding remover, disengage the 2 clips and remove the center roof drip side finish moulding.

      Note


      • Do not remove the clips.

      • If any clip is damaged or falls out, replace it with a new one.