REAR BUMPER REMOVAL


  1. REMOVE NO. 1 REAR BUMPER PLATE


    1. A01G7GOE01
      Text in Illustration
      *1 Protective Tape
      *2 Hook

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the No. 1 rear bumper plate.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A01G5TIE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly as shown in the illustration.

    2. A01G7MN

      Remove the 2 screws.

    3. A01G7QL

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01G8ZZ

      Remove the 6 screws.

    6. A01G6W1

      Remove the 2 clips.

    7. A01G73Y

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A01G667

      Disengage the 2 claws as shown in the illustration.

    9. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect each connector.

    10. Remove the rear bumper assembly.