FRONT BUMPER INSTALLATION


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. w/ Headlight Cleaner System:


      1. Connect the headlight cleaner hose.

    2. Move the front bumper assembly into position and install the 3 clips.

    3. Pull back the side of the front bumper assembly and connect each connector.

      Note

      Do not apply excessive force when separating the front bumper.

    4. A01G49G

      Engage the 2 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01G6AD

      Engage the 3 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Install the 6 screws.

    7. Install the 2 front bumper seal brackets.

      Note

      Do not pull the front bumper assembly after the front bumper seal bracket is installed, or the front bumper assembly may be damaged.

    8. Install the 2 screws.

    9. A01G49JE01
      Text in Illustration
      *1 Pin Hold Clip
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. Install the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL HOOD CENTER CUSHION


    1. Install the 2 hood center cushions.

  3. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 9 clips.

  4. ADD WASHER FLUID (w/ Headlight Cleaner System)


    1. Add washer fluid to the washer jar.

  5. ADJUST FOG LIGHT ASSEMBLY

    Click here