ROCKER PANEL MOULDING INSTALLATION

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. INSTALL ROCKER PANEL MOULDING ASSEMBLY


    1. Install 9 new clips to the rocker panel moulding assembly.

    2. Engage the 9 clips.

    3. Install the 7 clips.

    4. Install the 2 screws.

    5. A01G5Q4

      Engage the 2 claws to install the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

    6. Install 2 new grommets.

    7. Using a 4 mm hexagon wrench, install the 4 hexagon screws.

    8. Install the rocker panel moulding assembly with the screw.

  2. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. Temporarily install the No. 2 rocker panel moulding protector with the clip.

    2. Install the No. 2 rocker panel moulding protector with the 2 screws.