ROCKER PANEL MOULDING REASSEMBLY

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR


    1. for Front Side:


      1. Wipe off any tape adhesive residue with cleaner.

      2. A01G7X4

        Install a new No. 6 rocker panel moulding protector as shown in the illustration.

        Tech Tips

        Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.

    2. for Rear Side:


      1. Wipe off any tape adhesive residue with cleaner.

      2. A01G7WZ

        Install a new No. 6 rocker panel moulding protector as shown in the illustration.

        Tech Tips

        Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.

  2. INSTALL NO. 3 ROCKER PANEL MOULDING PROTECTOR


    1. Wipe off any tape adhesive residue with cleaner.

    2. Install 3 new No. 3 rocker panel moulding protectors so they are centered within the markings on the rocker panel molding assembly.

      A01G9NME01
      Text in Illustration
      *a Marking - -