ROCKER PANEL MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. A01G7AZ

      Remove the 2 screws.

    2. Remove the clip and No. 2 rocker panel moulding protector.

  2. REMOVE ROCKER PANEL MOULDING ASSEMBLY


    1. Put protective tape around the rocker panel moulding assembly and door.

      A01G84QE01
      Text in Illustration
      *1 Protective Tape - -
    2. A01G5Q5

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

    3. Remove the screw.

    4. A01G9GJ

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

    5. A01G8SR

      Disengage the 2 claws and remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

    6. A01G8VD

      Remove the 2 screws.

    7. Remove the 7 clips.

    8. A01G6Y8

      Disengage the 9 clips and remove the rocker panel moulding assembly.

    9. Remove the 9 clips from the rocker panel moulding assembly.