HAZARD WARNING SWITCH INSPECTION


  1. INSPECT MULTI-MEDIA MODULE RECEIVER ASSEMBLY (HAZARD SWITCH) (for Navigation Receiver Type)


    1. A01G4CZE01
      Text in Illustration
      *a

      Component without harness connected

      (Multi-media Module Receiver Assembly (Hazard Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      H98-9 (HAZ) - H97-12 (GND1) Hazard switch off 10 kΩ or higher
      Hazard switch on Below 1 Ω

      If the result is not as specified, replace the multi-media module receiver assembly.

    2. A01G4CZE02
      Text in Illustration
      *a

      Component without harness connected

      (Multi-media Module Receiver Assembly (Hazard Switch))

      Illumination Inspection


      1. Apply battery voltage to the multi-media module receiver assembly and check that the hazard switch illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → H98-10 (LJB)

        Battery negative (-) → H97-12 (GND1)

        		 Illuminates

        If the result is not as specified, replace the multi-media module receiver assembly.

  2. INSPECT RADIO RECEIVER ASSEMBLY (HAZARD SWITCH) (for Radio Receiver Type)


    1. A01G891E14
      Text in Illustration
      *a

      Component without harness connected

      (Radio Receiver Assembly (Hazard Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (HAZ) - 9 (GND) Hazard switch off 10 kΩ or higher
      Hazard switch on Below 1 Ω

      If the result is not as specified, replace the radio receiver assembly.

    2. A01G891E16
      Text in Illustration
      *a

      Component without harness connected

      (Radio Receiver Assembly (Hazard Switch))

      Illumination Inspection


      1. Apply battery voltage to the radio receiver assembly and check that the hazard switch illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 3 (LJB)

        Battery negative (-) → Terminal 9 (GND)

        		 Illuminates

        If the result is not as specified, replace the radio receiver assembly.