HEADLIGHT DIMMER SWITCH INSTALLATION


  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. Engage the 3 claws to install the headlight dimmer switch assembly.

    2. Connect the connector.

  2. INSTALL TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)


    1. Engage the claw to install the tilt and telescopic switch.

    2. Connect the connectors.

  3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01G56A

      Disconnect each connector.

    2. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.

  4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here