HEADLIGHT DIMMER SWITCH REMOVAL


  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01G56A

      Disconnect each connector.

    2. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.

  3. REMOVE TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)


    1. A01G9RW

      Disconnect the connectors.

    2. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.

  4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. A01G4O9

      Disconnect the connector.

    2. Using a screwdriver, disengage the 3 claws and remove the headlight dimmer switch assembly.