REAR LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL REAR LIGHT ASSEMBLY


    1. A01G5Y7E02

      Install the rear light assembly with the 4 nuts.

      Torque:
      Nut (A)
      3.7 N*m  { 38 kgf*cm, 33 in.*lbf }
      Nut (B)
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Install the luggage compartment door cover with the 11 clips.

    2. w/ Power Trunk Lid System:


      1. A01G9JN

        Engage the 2 claws.

      2. A01G50U

        Install the luggage compartment door cover with the 11 clips.

  3. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G5OP

      Install the luggage compartment door assist grip with the 2 screws.

    2. A01G6RW

      Engage the guide and 2 claws and close the cover.

  4. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Install the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  5. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Engage the 2 claws to install the luggage lock control cable plate.