REAR LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Disengage the 2 claws and remove the luggage lock control cable plate.

  2. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Remove the luggage compartment door inside handle from the luggage door lock control cable sub-assembly.

  3. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G6RW

      Disengage the 2 claws and guide and open the cover.

    2. A01G5OP

      Remove the 2 screws and luggage compartment door assist grip.

  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Using a clip remover, remove the 11 clips and luggage compartment door cover.

    2. w/ Power Trunk Lid System:


      1. A01G50U

        Using a clip remover, remove the 11 clips.

      2. A01G9JN

        Disengage the 2 claws and remove the luggage compartment door cover.

  5. REMOVE REAR LIGHT ASSEMBLY


    1. A01G5ZT

      Disconnect the connector.

    2. Remove the 4 nuts and rear light assembly.