REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the guide to temporarily install the rear combination light assembly.

    2. Install the screw.

    3. Install the rear combination light assembly with the 3 nuts.

      Torque:
      2.2 N*m  { 22 kgf*cm, 19 in.*lbf }

    4. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. Install the 3 clips.

    2. Engage the 2 fasteners and install the luggage compartment inner trim cover LH.

  3. INSTALL ROPE HOOK (for LH Side)


    1. A01G7UN

      Engage the 2 claws and install the rope hook.

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  5. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)


    1. Install the 3 clips.

    2. Engage the 2 fasteners and install the luggage compartment inner trim cover RH.

  6. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)


    1. Install the 2 clips.

    2. Engage the 4 fasteners and install the luggage compartment inner trim cover RH.

  7. INSTALL ROPE HOOK (for RH Side)


    1. A01G6P0

      Engage the 2 claws and install the rope hook.

  8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  9. INSTALL REAR FLOOR FINISH PLATE


    1. Engage the 4 clips and install the rear floor finish plate.

    2. Install the 3 clips.

  10. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)


    1. Engage the 2 guides.

    2. Install the 2 luggage hold belt striker assemblies with the 2 bolts.

  11. INSTALL SPARE WHEEL COVER PAD RH


    1. Install the spare wheel cover pad RH.

  12. INSTALL SPARE WHEEL COVER PAD LH


    1. Install the No. 2 spare wheel cover pad LH.

  13. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  14. INSTALL REAR BUMPER ASSEMBLY

    Click here