REAR COMBINATION LIGHT ASSEMBLY INSPECTION

INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

1. Remove the rear combination light lens and body LH.

2. 

   Text in Illustration

   *a	Component without harness connected (Rear Combination Light Lens and Body LH)

   Apply battery voltage to the rear combination light lens and body LH and check that the lights come on.

   OK
   Condition Specified Condition Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 The stop light comes on Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 4 The taillight comes on Battery positive (+) → Terminal 3*1 Battery negative (-) → Terminal 4 The rear side marker light comes on

   
   

   • *1: w/ Side Marker Light

   If the result is not as specified, repair or replace the rear combination light lens and body LH.

INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

1. Remove the rear combination light lens and body RH.

2. 

   Text in Illustration

   *a	Component without harness connected (Rear Combination Light Lens and Body RH)

   Apply battery voltage to the rear combination light lens and body RH and check that the lights come on.

   OK
   Condition Specified Condition Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 The stop light comes on Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 4 The taillight comes on Battery positive (+) → Terminal 3*1 Battery negative (-) → Terminal 4 The rear side marker light comes on

   
   

   • *1: w/ Side Marker Light

   If the result is not as specified, repair or replace the rear combination light lens and body RH.

INSPECT REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

1. Reconnect the rear combination light socket and wire sub-assembly LH to the rear combination light lens and body LH.

2. 

   Text in Illustration

   *a	Component without harness connected (Rear Combination Light Socket and Wire Sub-assembly LH)

   Apply battery voltage to the rear combination light socket and wire sub-assembly LH and check that the lights come on.

   OK

   Condition Specified Condition Battery positive (+) → Terminal 1 (STP) Battery negative (-) → Terminal 6 (E) The stop light comes on Battery positive (+) → Terminal 2 (TL) Battery negative (-) → Terminal 6 (E) The taillight comes on Battery positive (+) → Terminal 4 (B)*1 Battery negative (-) → Terminal 6 (E) The rear side marker light comes on Battery positive (+) → Terminal 5 (TRN) Battery negative (-) → Terminal 6 (E) The turn signal light comes on

   
   

   • *1: w/ Side Marker Light

   If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly LH.

INSPECT REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY RH

1. Reconnect the rear combination light socket and wire sub-assembly RH to the rear combination light lens and body RH.

2. 

   Text in Illustration

   *a	Component without harness connected (Rear Combination Light Socket and Wire Sub-assembly RH)

   Apply battery voltage to the rear combination light socket and wire sub-assembly RH and check that the lights come on.

   OK

   Condition Specified Condition Battery positive (+) → Terminal 1 (STP) Battery negative (-) → Terminal 6 (E) The stop light comes on Battery positive (+) → Terminal 2 (TL) Battery negative (-) → Terminal 6 (E) The taillight comes on Battery positive (+) → Terminal 4 (B)*1 Battery negative (-) → Terminal 6 (E) The rear side marker light comes on Battery positive (+) → Terminal 5 (TRN) Battery negative (-) → Terminal 6 (E) The turn signal light comes on

   
   

   • *1: w/ Side Marker Light

   If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly RH.