HEADLIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. PRECAUTION (for HID Headlight)

    Click here

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  4. REMOVE FRONT FENDER UPPER PROTECTOR


    1. A01G91G

      Disengage the 4 clips.

    2. Disengage the 2 guides and remove the front fender upper protector.

  5. REMOVE HEADLIGHT ASSEMBLY


    1. A01G5NJE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the 3 screws and bolt.

    2. A01G86H

      Disconnect each connector and remove the headlight assembly.