AUTOMATIC HIGH BEAM SYSTEM DIAGNOSIS SYSTEM


  1. DESCRIPTION


    1. Automatic high beam system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and to repair it.

  2. CHECK DLC3


    1. Check the DLC3 Click here.

  3. INSPECT BATTERY VOLTAGE


    1. Measure the battery voltage with the engine switch off.

      If the voltage is below 11 V, recharge or replace the battery.

    2. DIAGNOSIS SYSTEM


      1. A01G5PRE01
      3. Text in Illustration
      *a Multi-information Display

When the automatic high beam system malfunctions, Check AHB System is displayed on the multi-information display.

Tech Tips