OUTER MIRROR SWITCH INSPECTION


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)


    1. A01G8JGE01
      Text in Illustration
      *1 Mirror Adjust Switch
      *2 Mirror Select Switch
      *a

      Component without harness connected

      (Outer Mirror Switch Assembly)

      Check the switch functions.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        16 (M+) - 14 (E) Mirror adjust switch pressed up 90 to 110 Ω
        Mirror adjust switch pressed down 437 to 503 Ω
        Mirror adjust switch pressed left 744 to 856 Ω
        Mirror adjust switch pressed right 225 to 275 Ω
        Mirror adjust switch not pressed 10 kΩ or higher
        13 (MSW) - 14 (E) Mirror select switch R Below 1 Ω
        Mirror select switch L 90 to 110 Ω
        Mirror select switch off 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    2. Check the LED illuminates.


      1. A01G8JGE02
        Text in Illustration
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Apply battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        Standard
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 23 (ILL+)

        Battery negative (-) → Terminal 24 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the outer mirror switch assembly.

  2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)


    1. Check the mirror select switch and mirror surface adjust switch.


      1. A01G564E09
        Text in Illustration
        *1 Mirror select switch
        *2 Mirror surface adjust switch
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Turn the mirror select switch to the L position.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance (for left side)
        Tester Connection Condition Specified Condition

        9 (VL) - 11 (B)

        6 (M+) - 12 (E)

        		 UP Below 1 Ω
        OFF 10 kΩ or higher

        9 (VL) - 12 (E)

        6 (M+) - 11 (B)

        		 DOWN Below 1 Ω
        OFF 10 kΩ or higher

        10 (HL) - 11 (B)

        6 (M+) - 12 (E)

        		 LEFT Below 1 Ω
        OFF 10 kΩ or higher

        10 (HL) - 12 (E)

        6 (M+) - 11 (B)

        		 RIGHT Below 1 Ω
        OFF 10 kΩ or higher

      3. Turn the mirror select switch to the R position.

      4. Measure the resistance according to the value(s) in the table below.

        Standard Resistance (for right side)
        Tester Connection Condition Specified Condition

        8 (VR) - 11 (B)

        6 (M+) - 12 (E)

        		 UP Below 1 Ω
        OFF 10 kΩ or higher

        8 (VR) - 12 (E)

        6 (M+) - 11 (B)

        		 DOWN Below 1 Ω
        OFF 10 kΩ or higher

        7 (HR) - 11 (B)

        6 (M+) - 12 (E)

        		 LEFT Below 1 Ω
        OFF 10 kΩ or higher

        7 (HR) - 12 (E)

        6 (M+) - 11 (B)

        		 RIGHT Below 1 Ω
        OFF 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    2. Check the mirror retract switch.


      1. A01G564E10
        Text in Illustration
        *1 Mirror retract switch
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        14 (MF) - 12 (E) Mirror retract switch retract position Below 1 Ω
        13 (MR) - 11 (B) Below 1 Ω
        14 (MF) - 11 (B) Mirror retract switch return position Below 1 Ω
        13 (MR) - 12 (E) Below 1 Ω

        If the result is not as specified, replace the outer mirror switch assembly.

    3. Check the LED illuminates.


      1. A01G564E11
        Text in Illustration
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Apply battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        Standard
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 15 (ILL+)

        Battery negative (-) → Terminal 16 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the outer mirror switch assembly.

  3. INSPECT RETRACTABLE OUTER MIRROR SWITCH


    1. A01G478E37
      Text in Illustration
      *a

      Component without harness connected

      (Retractable Outer Mirror Switch)

      Check that the switch functions.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 (MAT) - 4 (E) AUTO position Below 1 Ω
        Except AUTO position 10 kΩ or higher
        2 (MR) - 4 (E) Retract position Below 1 Ω
        Except retract position 10 kΩ or higher

        If the result is not as specified, replace the outer mirror retractable switch.

    2. A01G478E20
      Text in Illustration
      *a

      Component without harness connected

      (Retractable Outer Mirror Switch)

      Check that the LED illuminates.


      1. Apply battery voltage to the retractable outer mirror switch and check that the LED illuminates.

        Measurement Condition Specified Condition

        Battery positive (+) → 5 (ILL+)

        Battery negative (-) → 1 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the retractable outer mirror switch.