OUTER REAR VIEW MIRROR DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The following procedure is for the LH side.


  1. REMOVE OUTER MIRROR


    1. Push the upper part of the mirror surface and tilt it.

    2. A01G7SSE01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover

      Apply protective tape to the areas shown in the illustration.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror.

    4. Push the lower part of the mirror surface and tilt it.

    5. A01G83VE01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover

      Apply protective tape to the areas shown in the illustration.

    6. Using a moulding remover, disengage the 2 claws at the upper part of the outer rear view mirror.

    7. w/o Blind Spot Monitor System:


      1. A01G5VB

        Disengage the 2 clamps.

      2. Disconnect the 3 connectors and remove the outer mirror.

    8. w/ Blind Spot Monitor System:


      1. A01G87I

        Disengage the 3 clamps.

      2. Disconnect the 3 connectors and remove the outer mirror.

      3. Release the tabs of the blind spot monitor indicator connector to disconnect the connector and remove the outer mirror.

        Note


        • Do not bend the tabs excessively to prevent them from being damaged.

        • If the tabs are damaged, replace the outer mirror with a new one.

  2. REMOVE NO. 2 OUTER MIRROR COVER


    1. A01G7AA

      Remove the 5 screws.

    2. Disengage the 2 claws and 4 guides and remove the visor assembly.

    3. A01G4LB

      Disengage the 2 guides.

    4. A01G8Z4

      Disconnect the connector and remove the No. 2 outer mirror cover with the side turn signal light assembly as a unit.

    5. A01G5SI

      Disengage the guide and remove the No. 2 outer mirror cover from the side turn signal light assembly.

  3. REMOVE OUTER MIRROR RETRACTOR


    1. A01G53K

      Disconnect the connector and remove the outer mirror light from the outer mirror retractor.

  4. REMOVE OUTER MIRROR LIGHT BULB ASSEMBLY


    1. Disconnect the connector and remove the outer mirror light.

    2. A01G778

      Turn the socket with the outer mirror light bulb assembly in the direction indicated by the arrows in the illustration and disconnect them as a unit.

    3. Remove the outer mirror light bulb assembly from the socket.