FUEL LID OPENER SWITCH INSTALLATION


  1. INSTALL FUEL LID OPENER SWITCH


    1. Engage the 2 claws to install the fuel lid opener switch.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. Connect each connector.

    2. Engage the 12 claws, 2 clips and guide.

    3. Install the lower No. 1 instrument panel finish panel with the 2 bolts <B>.

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G96C

      Engage the 2 claws and 5 clips to install the lower center instrument panel finish panel as shown in the illustration.

  5. INSTALL INSTRUMENT SIDE PANEL LH


    1. A01G990

      Engage the 2 guides.

    2. A01G8LE

      Engage the 2 claws and 4 clips to install the instrument side panel LH as shown in the illustration.

  6. INSTALL FRONT DOOR OPENING TRIM COVER LH


    1. Engage the guide.

    2. Engage the 3 claws to install the front door opening trim cover LH.

  7. INSTALL COWL SIDE TRIM BOARD LH


    1. Engage the clip and claw.

    2. Install the cowl side trim board LH with the clip.

  8. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Engage the 10 claws to install the front door scuff plate LH.