LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01G8TA

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM BOARD LH


    1. A01G75T

      Remove the clip.

    2. Disengage the claw and clip, and remove the cowl side trim board LH.

  3. REMOVE FRONT DOOR OPENING TRIM COVER LH


    1. A01G9KP

      Disengage the 3 claws.

    2. Disengage the guide and remove the front door opening trim cover LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH


    1. A01G5PZ

      Using a moulding remover, disengage the 2 claws and 4 clips as shown in the illustration.

    2. A01G64E

      Disengage the 2 guides and remove the instrument side panel LH as shown in the illustration.

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G6Z9E01
      Text in Illustration
      *a Lower Center Instrument Panel Finish Panel Hole

      Insert a moulding remover as shown in the illustration.

    2. A01G5J0

      Using a moulding remover, disengage the 2 claws and 5 clips and remove the lower center instrument panel finish panel as shown in the illustration.

  6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01G4MG

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. for LHD:


      1. A01G78A

        Remove the 2 bolts <B>.

      2. A01G4U5

        Disengage the 12 claws, 2 clips and guide.

      3. Disconnect each connector and disengage each clamp to remove the lower No. 1 instrument panel finish panel.

    2. for RHD:


      1. A01G9IWE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, disengage the 2 claws and open the cover.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01G5H6

        Remove the 2 bolts <B>.

      3. A01G7F1

        Disengage the 6 claws, 3 clips and guide.

      4. Disconnect each connector and disengage each clamp to remove the lower No. 1 instrument panel finish panel.

  8. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY


    1. A01G9H9

      Disengage the 2 claws and remove the luggage door opening switch assembly.