LUGGAGE DOOR HINGE TORSION BAR REMOVAL

Note

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


  1. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Disengage the 2 claws and remove the luggage lock control cable plate.

  2. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Remove the luggage compartment door inside handle from the luggage door lock control cable sub-assembly.

  3. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G6RW

      Disengage the 2 claws and guide and open the cover.

    2. A01G5OP

      Remove the 2 screws and luggage compartment door assist grip.

  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Using a clip remover, remove the 11 clips and luggage compartment door cover.

    2. w/ Power Trunk Lid System:


      1. A01G50U

        Using a clip remover, remove the 11 clips.

      2. A01G9JN

        Disengage the 2 claws and remove the luggage compartment door cover.

  5. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  6. REMOVE SPARE WHEEL COVER PAD LH


    1. Remove the spare wheel cover pad LH.

  7. REMOVE SPARE WHEEL COVER PAD RH


    1. Remove the spare wheel cover pad RH.

  8. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)


    1. A01G6A7

      Remove the 2 bolts.

    2. Disengage the 2 guides and remove the 2 luggage hold belt striker assemblies.

  9. REMOVE REAR FLOOR FINISH PLATE


    1. A01G4NX

      Using a clip remover, remove the 3 clips.

    2. A01G8BW

      Disengage the 4 clips and remove the rear floor finish plate.

  10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. A01G8GX

      Remove the bolt.

    2. Disengage the guide and remove the luggage hold belt striker assembly.

  11. REMOVE ROPE HOOK (for LH Side)


    1. A01G9HY

      Disengage the 2 claws and remove the rope hook as shown in the illustration.

  12. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. A01G8WR

      Using a clip remover, remove the 3 clips.

    2. Disengage the 2 fasteners and remove the luggage compartment inner trim cover LH.

  13. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)


    1. A01G5E4

      Remove the bolt.

    2. Disengage the guide and remove the luggage hold belt striker assembly.

  14. REMOVE ROPE HOOK (for RH Side)


    1. A01G4GB

      Disengage the 2 claws and remove the rope hook as shown in the illustration.

  15. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)


    1. A01G8HD

      Using a clip remover, remove the 3 clips.

    2. Disengage the 2 fasteners and remove the luggage compartment inner trim cover RH.

  16. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)


    1. A01G4XE

      Using a clip remover, remove the 2 clips.

    2. Disengage the 4 fasteners and remove the luggage compartment inner trim cover RH.

  17. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH (w/ Power Trunk Lid System)


    1. A01G7FB

      Disengage the 2 claws.

    2. Disengage the 3 clips and remove the luggage compartment trim cover assembly RH.

  18. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01G8CV

      Disengage the clamp.

    2. Remove the clip and luggage compartment door hinge cover LH.

  19. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH


    1. A01G6HL

      Remove the clip and luggage compartment door hinge cover RH.

  20. REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY (w/ Power Trunk Lid System)


    1. A01G75R

      Disconnect the connector.

    2. Disengage the clamp.

    3. A01G8IY

      Remove the nut.

    4. Remove the 3 bolts.

    5. Disengage the 2 guides and remove the luggage closer motor assembly.

  21. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A01G44LE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    2. A01G7JM

      Disengage the 2 claws as shown in the illustration.

    3. A01G8BN

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    4. A01G75OE01

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    5. A01G6E5

      Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.

  22. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A01G9QME01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    2. A01G5WN

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    3. A01G4QIE01

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    4. A01G984

      Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.

  23. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A01G814

      Remove the luggage compartment door torsion bar support as shown in the illustration.

      Note

      Make sure to replace the luggage compartment door torsion bar support with a new one.