LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY INSTALLATION


  1. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY


    1. Apply MP grease to the sliding parts of the luggage door closer assembly.

    2. Install the luggage door closer assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

    4. Connect the luggage door lock control cable sub-assembly.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Install the luggage compartment door cover with the 11 clips.

    2. w/ Power Trunk Lid System:


      1. A01G9JN

        Engage the 2 claws.

      2. A01G50U

        Install the luggage compartment door cover with the 11 clips.

  3. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G5OP

      Install the luggage compartment door assist grip with the 2 screws.

    2. A01G6RW

      Engage the guide and 2 claws and close the cover.

  4. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Install the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  5. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Engage the 2 claws to install the luggage lock control cable plate.