LUGGAGE COMPARTMENT DOOR REASSEMBLY


  1. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION


    1. A01G5RJ

      Engage the 2 claws and install 2 new luggage compartment door cushions.

  2. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. Engage the claw to install the license plate light assembly.

    2. Connect the connector.

  3. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)


    1. Connect the connector.

    2. Engage the 2 claws to install the rear television camera assembly.

  4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Install 6 new gaskets to the luggage compartment door outside garnish sub-assembly.

    2. Install 2 new clips to the luggage compartment door outside garnish sub-assembly.

    3. Engage the 2 clips.

    4. Install the 2 nuts.

    5. Install the luggage compartment door outside garnish sub-assembly with the 2 screws.

  5. INSTALL REAR LIGHT ASSEMBLY LH


    1. A01G5Y7E02

      Install the rear light assembly with the 4 nuts.

      Torque:
      Nut (A)
      3.7 N*m  { 38 kgf*cm, 33 in.*lbf }
      Nut (B)
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the connector.

  6. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01G8CV

      Install the luggage compartment door hinge cover LH with the clip.

    2. Engage the clamp.

  8. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH


    1. A01G6HL

      Install the luggage compartment door hinge cover RH with the clip.

  9. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH (w/ Power Trunk Lid System)


    1. Engage the 3 clips.

    2. Engage the 2 claws to install the luggage compartment trim cover assembly RH.

  10. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)


    1. Install the 2 clips.

    2. Engage the 4 fasteners and install the luggage compartment inner trim cover RH.

  11. INSTALL ROPE HOOK (w/ Power Trunk Lid System)


    1. A01G6P0

      Engage the 2 claws and install the rope hook.

  12. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Power Trunk Lid System)

    for RH Side: Click here

  13. INSTALL REAR FLOOR FINISH PLATE (w/ Power Trunk Lid System)


    1. Engage the 4 clips and install the rear floor finish plate.

    2. Install the 3 clips.

  14. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Power Trunk Lid System)

    for Rear Side: Click here

  15. INSTALL SPARE WHEEL COVER PAD RH (w/ Power Trunk Lid System)


    1. Install the spare wheel cover pad RH.

  16. INSTALL SPARE WHEEL COVER PAD LH (w/ Power Trunk Lid System)


    1. Install the No. 2 spare wheel cover pad LH.

  17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Power Trunk Lid System)


    1. Install the luggage compartment floor mat.

  18. INSTALL LUGGAGE LOCK CONTROL CABLE CLAMP


    1. A01G4BV

      Engage the guide and clip to install the luggage lock control cable clamp.

  19. INSTALL LUGGAGE ELECTRICAL KEY SWITCH


    1. Install the luggage electrical key switch with the 2 nuts.

    2. Connect the connector.

  20. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    1. A01G6NU

      Install the luggage compartment door lock cylinder assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A01G9GB

      Engage the clamp.

    3. Connect the connector.

  21. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Power Trunk Lid System)


    1. Apply MP grease to the sliding parts of the luggage compartment door lock assembly.

    2. Install the luggage compartment door lock assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

    4. Connect the 2 luggage door lock control cable sub-assemblies.

  22. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY (w/ Power Trunk Lid System)


    1. Apply MP grease to the sliding parts of the luggage door closer assembly.

    2. Install the luggage door closer assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

    4. Connect the luggage door lock control cable sub-assembly.

  23. INSTALL DOOR CONTROL SWITCH (w/ Power Trunk Lid System)


    1. Engage the clamp.

    2. Install the door control switch with the 2 screws.

    3. Connect the connector.

  24. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Install the luggage compartment door cover with the 11 clips.

    2. w/ Power Trunk Lid System:


      1. A01G9JN

        Engage the 2 claws.

      2. A01G50U

        Install the luggage compartment door cover with the 11 clips.

  25. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G5OP

      Install the luggage compartment door assist grip with the 2 screws.

    2. A01G6RW

      Engage the guide and 2 claws and close the cover.

  26. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Install the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  27. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Engage the 2 claws to install the luggage lock control cable plate.

  28. ADJUST REAR TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTINGS) (w/ Parking Assist Monitor System)

    Click here