FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION


  1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. Connect the connector.

    2. Engage the clamp.

    3. Install the fuel lid lock withe motor assembly with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    4. Engage the 2 claws.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. Install the 3 clips.

    2. Engage the 2 fasteners and install the luggage compartment inner trim cover LH.

  3. INSTALL ROPE HOOK


    1. A01G7UN

      Engage the 2 claws and install the rope hook.

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  5. INSTALL REAR FLOOR FINISH PLATE


    1. Engage the 4 clips and install the rear floor finish plate.

    2. Install the 3 clips.

  6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)


    1. Engage the 2 guides.

    2. Install the 2 luggage hold belt striker assemblies with the 2 bolts.

  7. INSTALL SPARE WHEEL COVER PAD RH


    1. Install the spare wheel cover pad RH.

  8. INSTALL SPARE WHEEL COVER PAD LH


    1. Install the No. 2 spare wheel cover pad LH.

  9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.