FUEL LID OPENER MOTOR ASSEMBLY INSPECTION


  1. INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. A01G7R1E01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Lid Lock with Motor Assembly)
      *b Shaft stroke

      Check the operation of the fuel lid lock with motor assembly.


      1. Apply battery voltage to the fuel lid lock with motor assembly connector, and check that the fuel lid lock with motor assembly operates smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Unlock

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Lock

        If the result is not as specified, replace the fuel lid lock with motor assembly.

    2. Measure the shaft stroke.

      Standard
      10.3 mm (0.406 in.) or more

      If the result is not as specified, replace the fuel lid lock with motor assembly.