TRUNK LID ACTUATOR INSTALLATION


  1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY


    1. Engage the 2 guides.

    2. Install the luggage closer motor assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Install the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    4. Engage the clamp.

    5. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH


    1. A01G6HL

      Install the luggage compartment door hinge cover RH with the clip.

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. Engage the 3 clips.

    2. Engage the 2 claws to install the luggage compartment trim cover assembly RH.

  4. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH


    1. Install the 2 clips.

    2. Engage the 4 fasteners and install the luggage compartment inner trim cover RH.

  5. INSTALL ROPE HOOK


    1. A01G6P0

      Engage the 2 claws and install the rope hook.

  6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  7. INSTALL REAR FLOOR FINISH PLATE


    1. Engage the 4 clips and install the rear floor finish plate.

    2. Install the 3 clips.

  8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)


    1. Engage the 2 guides.

    2. Install the 2 luggage hold belt striker assemblies with the 2 bolts.

  9. INSTALL SPARE WHEEL COVER PAD RH


    1. Install the spare wheel cover pad RH.

  10. INSTALL SPARE WHEEL COVER PAD LH


    1. Install the No. 2 spare wheel cover pad LH.

  11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  12. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Install the luggage compartment door cover with the 11 clips.

    2. w/ Power Trunk Lid System:


      1. A01G9JN

        Engage the 2 claws.

      2. A01G50U

        Install the luggage compartment door cover with the 11 clips.

  13. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G5OP

      Install the luggage compartment door assist grip with the 2 screws.

    2. A01G6RW

      Engage the guide and 2 claws and close the cover.

  14. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Install the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  15. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Engage the 2 claws to install the luggage lock control cable plate.

  16. INITIALIZE POWER TRUNK LID SYSTEM

    Click here

  17. INSPECT POWER TRUNK LID OPERATION

    Click here