HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas "a" through "e" are within each standard range.

      A01G8PSE01
      Standard Clearance
      Area Measurement Area Measurement
      a 2.35 to 5.35 mm (0.0925 to 0.211 in.) b -1.4 to 1.6 mm (-0.0551 to 0.063 in.)
      c 8.70 mm (0.343 in.) d 2.0 to 5.0 mm (0.0787 to 0.197 in.)
      e -1.4 to 1.6 mm (-0.0551 to 0.063 in.) - -