SLIDING ROOF HOUSING (for Glass Roof) DISASSEMBLY


  1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY


    1. A01G9NN

      Remove the 2 bolts and sliding roof drive gear sub-assembly.

  2. REMOVE NO. 4 SUNSHADE TRIM SUB-ASSEMBLY


    1. A01G6FB

      Using a T25 "TORX" socket wrench, remove the 2 screws and 2 No. 1 sliding roof sunshade stoppers.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

    2. A01G8EX

      Slide and remove the No. 3 sunshade trim sub-assembly with No. 4 sunshade trim sub-assembly as shown in the illustration.

    3. Remove the No. 4 sunshade trim sub-assembly from the No. 3 sunshade trim sub-assembly.

  3. REMOVE NO. 1 SUNSHADE TRIM SUB-ASSEMBLY


    1. A01G50W

      Using a T25 "TORX" socket wrench, remove the 2 screws and 2 No. 1 sliding roof sunshade stoppers.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

    2. A01G8KKE01
      Text in Illustration
      *1 Protective Tape
      *2 Sliding Roof Rear Shoe Link Sub-assembly

      Using a screwdriver, slide the sliding roof rear shoe link sub-assembly in the direction indicated by the arrow in the illustration to fully open position.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and the LH side.

    3. A01G54P

      Using a T25 "TORX" socket wrench, remove the 6 screws.

    4. Disengage the 2 claws and 6 guides, and remove the sliding roof cable guide casing.

    5. A01G48R

      Slide and remove the No. 1 sunshade trim sub-assembly with No. 2 sunshade trim sub-assembly as shown in the illustration.

    6. Remove the No. 1 sunshade trim sub-assembly from No. 2 sunshade trim sub-assembly.