SLIDING ROOF SYSTEM TERMINALS OF ECU


  1. CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)


    1. Disconnect the T4 sliding roof ECU (sliding roof drive gear sub-assembly) connector.

      A01G86CE08

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      T4-8 (B) - T4-12 (E) B - W-B Battery power supply Always 11 to 14 V
      T4-1 (IG) - T4-12 (E) Y - W-B IG power supply Engine switch off Below 1 V
      T4-1 (IG) - T4-12 (E) Y - W-B IG power supply Engine switch on (IG) 11 to 14 V
      T4-12 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction in the wire harness.

    3. Reconnect the T4 sliding roof ECU (sliding roof drive gear sub-assembly) connector.

    4. Measure the voltage according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      T4-7 (OPN) - T4-12 (E) LG - W-B Sliding roof motor open Engine switch on (IG), OPEN switch on Below 1 V
      T4-7 (OPN) - T4-12 (E) LG - W-B Sliding roof motor open Engine switch on (IG), OPEN switch off 11 to 14 V
      T4-5 (CLS) - T4-12 (E) G - W-B Sliding roof motor close Engine switch on (IG), CLOSE switch on Below 1 V
      T4-5 (CLS) - T4-12 (E) G - W-B Sliding roof motor close Engine switch on (IG), CLOSE switch off 11 to 14 V
      T4-4 (UP) - T4-12 (E) R - W-B Sliding roof motor up Engine switch on (IG), UP switch on Below 1 V
      T4-4 (UP) - T4-12 (E) R - W-B Sliding roof motor up Engine switch on (IG), UP switch off 11 to 14 V
      T4-6 (DWN) - T4-12 (E) L - W-B Sliding roof motor down Engine switch on (IG), DOWN switch on Below 1 V
      T4-6 (DWN) - T4-12 (E) L - W-B Sliding roof motor down Engine switch on (IG), DOWN switch off 11 to 14 V

      If the result is not as specified, the sliding roof ECU (sliding roof drive gear sub-assembly) may have a malfunction.