PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2074

DTC Code DTC Name
B2074 Driver Side Seat Belt Buckle Switch Circuit Malfunction

DESCRIPTION

This DTC is stored when a malfunction is detected in the driver seat buckle switch circuit or passenger seat buckle switch circuit.

DTC No. DTC Detection Condition Trouble Area
B2074 Malfunction in front seat inner belt assembly LH

  • CAN communication system

  • Wire harness or connector

  • Front seat inner belt assembly LH

  • Airbag sensor assembly

  • Seat belt control ECU

WIRING DIAGRAM

A01G5YXE02

INSPECTION PROCEDURE

Tech Tips

This circuit uses CAN communication. Therefore, be sure to check that the CAN communication system is normal before performing inspection.

PROCEDURE


  1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      CAN communication system DTC is not output.

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK DTC OUTPUT (AIRBAG SYSTEM)


    1. Check for airbag system DTCs Click here.

      OK
      Airbag system DTCs are not output.

    NG

    GO TO AIRBAG SYSTEM Click here

    OK

  3. CHECK DTC OUTPUT (PRE-CRASH SAFETY SYSTEM)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Pre-Crash / Trouble Codes.

    5. Clear the DTCs Click here.

    6. Recheck for DTCs.

      OK
      DTC B2074 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) Click here