CLOCK INSTALLATION


  1. INSTALL CLOCK ASSEMBLY


    1. Engage the 4 claws to install the clock assembly.

  2. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Engage the 11 claws and clip to install the No. 2 instrument panel register assembly.

      A01G5L1

      Note

      When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 10 claws and 2 clips to install the center instrument cluster finish panel garnish.

      A01G9I0

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Engage the 5 claws and 2 guides.

    2. Install the 2 screws.

    3. A01G8Q8

      Engage the 4 clips and 2 guides to install the instrument cluster finish panel sub-assembly.

  5. ADJUST CLOCK

  6. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Note

    Reset the auto away/return function setting to the previous condition by changing the customize parameter Click here.