ACCESSORY METER REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01G5N1

      Remove the 2 clips.

    2. A01G69AE02
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    3. A01G9AO

      Insert a moulding remover as shown in the illustration.

    4. A01G60A

      Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow shown in the illustration to disengage the 2 clips and 5 guides, and remove the center instrument cluster finish panel sub-assembly.

  2. REMOVE ACCESSORY METER ASSEMBLY


    1. A01G671

      Remove the 2 screws.

    2. A01G5S5

      Pull the accessory meter assembly in the direction indicated by the arrow to disengage the 2 clips.

    3. Disengage the clamp.

    4. Disconnect each connector and remove the accessory meter assembly.