METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning, Display.

      5. Select the setting by referring to the table below.

        Note


        • Be sure to record the current value before customizing.

        Warning
        Tester Display Default Content Setting Relevant ECU
        Flasher Sound Volume Adjustment Medium Function to change the flasher sound volume Medium, Small, Large Combination meter assembly
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing times OFF, 3, 5, 7 Combination meter assembly
        Display
        Tester Display Default Content Setting Relevant ECU
        ECO Drive Indicator Zone ON Function to change the ECO drive indicator zone OFF or ON Combination meter assembly
        ODO Display Time After IG OFF Setting 30s Function to change the ODO display time after engine switch is turned off 30s, 60s, 600s, OFF Combination meter assembly

    2. Customizing with the combination meter assembly

      Tech Tips


      • Press and hold the DISP switch to enter an item.

      • Briefly press the DISP switch to select an item.


      1. Turn the engine switch on (IG).

      2. Select the following menu: Settings

      3. Select the setting by referring to the table below.

        Note


        • Be sure to record the current value before customizing.

        Settings
        Combination meter assembly display Default Content Setting Relevant ECU
        Language *1 Function to change the language on the display English, French, Spanish, Chinese, Russian Combination meter assembly
        Units km(km/L) Function to change the units on the display km(km/L), km(L/100km) Combination meter assembly
        ECO lamp On(Self-lighting) ECO Off (3/5) Function to active/deactive the eco driving indicator light and meter ambient illumination (ECO lamp) On(Always) ECO On (1/5), On(Always) ECO Off (2/5), On(Self-lighting) ECO Off (3/5), Off ECO On (4/5), Off ECO Off (5/5) Combination meter assembly
        Drive monitor Outside Function to change the fixed display Fuel consumption, Cruising range, Outside Combination meter assembly
        Lamp brightness Standard Function to change the lamp brightness Bright or Standard Combination meter assembly
        SPORT lamp On Function to display/not display the meter ambient illumination (SPORT lamp) On or Off Combination meter assembly

        • *1: Changes according to the vehicle specification

      4. Press and hold the DISP switch.

      5. Return to the item selection screen.