BACK DOOR COURTESY SWITCH INSTALLATION


  1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (w/o Power Trunk Lid System)


    1. Connect the 2 luggage door lock control cable sub-assemblies to the luggage compartment door lock assembly.

    2. A01G884

      Engage the claw as shown in the illustration.

  2. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (w/ Power Trunk Lid System)


    1. Connect the 2 luggage door lock control cable sub-assemblies to the luggage compartment door lock assembly.

  3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Power Trunk Lid System)


    1. Apply MP grease to the sliding parts of the luggage compartment door lock assembly.

    2. Install the luggage compartment door lock assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

    4. Connect the 2 luggage door lock control cable sub-assemblies.

  4. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY (w/ Power Trunk Lid System)


    1. Apply MP grease to the sliding parts of the luggage door closer assembly.

    2. Install the luggage door closer assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

    4. Connect the luggage door lock control cable sub-assembly.

  5. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. w/o Power Trunk Lid System:


      1. A01G50U

        Install the luggage compartment door cover with the 11 clips.

    2. w/ Power Trunk Lid System:


      1. A01G9JN

        Engage the 2 claws.

      2. A01G50U

        Install the luggage compartment door cover with the 11 clips.

  6. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01G5OP

      Install the luggage compartment door assist grip with the 2 screws.

    2. A01G6RW

      Engage the guide and 2 claws and close the cover.

  7. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE


    1. A01G7QM

      Install the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  8. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE


    1. A01G9RS

      Engage the 2 claws to install the luggage lock control cable plate.