REAR DOOR COURTESY SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      There are 2 diameters for the "TORX" screws: 6 mm (0.236 in.) and 7 mm (0.276 in.). The diameter of a supplied "TORX" screw is 7 mm (0.276 in.).

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH


    1. Engage the 5 claws to install the rear seat side garnish LH.

  3. INSTALL REAR DOOR SCUFF PLATE


    1. Engage the 8 claws to install the rear door scuff plate LH.

  4. INSTALL REAR SEAT ASSEMBLY

    Click here