AMBIENT LIGHT (for Front Door) INSPECTION


  1. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (AMBIENT LIGHT)


    1. A01G4T9E01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly LH)

      Connect a positive (+) lead from the battery to terminal 1 (+) and a negative (-) lead to terminal 2 (-).

    2. Check that the ambient light comes on.

      OK
      Ambient light comes on.

      If the result is not as specified, replace the front door trim board sub-assembly LH.

  2. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH (AMBIENT LIGHT)


    1. A01G4T9E01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly RH)

      Connect a positive (+) lead from the battery to terminal 1 (+) and a negative (-) lead to terminal 2 (-).

    2. Check that the ambient light comes on.

      OK
      Ambient light comes on.

      If the result is not as specified, replace the front door trim board sub-assembly RH.