ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. for LHD:


      1. A01G6IJ

        Apply MP grease to the sliding areas of the lock.

    2. for RHD:


      1. A01G5BA

        Apply MP grease to the sliding areas of the lock.

    3. Connect the hood lock control cable assembly.

    4. Install the hood lock assembly with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    5. Engage the clamp.

    6. Connect the connector.

  2. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 9 clips.

  3. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  4. ADJUST HOOD SUB-ASSEMBLY

    Click here