ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. Measure the resistance according to the value(s) in the table below.

      A01G9S3E01
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Opened 10 kΩ or higher
      1 - 2 Locked Below 1 Ω
      Text in Illustration
      *A for LHD *B for RHD
      *1 Opened *2 Locked
      *a

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))

      		 - -

      If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).