ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL

REMOVE REAR SEAT CUSHION ASSEMBLY

1. 

   Text in Illustration

   *1	Rear Seatback Hinge Hook

   Disengage the 2 hooks <A> on the front side of the rear seat cushion assembly from the vehicle body as shown in the illustration.

   Standard Measurement

   a	100 mm (3.94 in.) or less

   Note

   Follow the instructions below carefully as the cushion frame can be deformed easily.

   
   

   1. Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the rear seat cushion to disengage the hook.

   2. Repeat the step above for the other hook.

2. Disengage the 2 hooks <B> on the rear side of rear seat cushion assembly from the rear seatback hinge hook.

3. 

   Text in Illustration

   *1	Buckle of the Rear Seat Inner with Center Belt Assembly LH
   *2	Buckle of the Rear Seat Inner with Center Belt Assembly RH

   Remove the buckle of the rear seat inner with center belt assembly LH and buckle of the rear seat inner with center belt assembly RH from the rear seat cushion assembly.

4. w/ Climate Control Seat System:

   
   

   1. Disconnect the rear seat heater connector.

5. Remove the rear seat cushion assembly.

   Note

   Be careful not to damage the vehicle body.