ELECTRICAL KEY OSCILLATOR (for Front Floor) INSTALLATION


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect the connector.

    2. Engage the 10 claws and clip to install the upper console panel sub-assembly.

  3. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 7 claws and 4 clips to install the console panel sub-assembly.

    4. Move the shift lever to P.

  4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G96C

      Engage the 2 claws and 5 clips to install the lower center instrument panel finish panel as shown in the illustration.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01G8LX

      Turn the shift lever knob sub-assembly clockwise to install it.