ELECTRICAL KEY OSCILLATOR (for Front Floor) REMOVAL


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01G8NA

      Turn the shift lever knob sub-assembly counterclockwise and remove it.

  2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A01G7SVE01
      Text in Illustration
      *a Lower Center Instrument Panel Finish Panel Hole

      Insert a moulding remover as shown in the illustration.

    2. A01G5J0

      Disengage the 2 claws and 5 clips and remove the lower center instrument panel finish panel as shown in the illustration.

  3. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01G6BV

      Disengage the 7 claws and 4 clips.

    3. Disengage the clamp.

    4. Disconnect each connector and remove the console panel sub-assembly.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01G8GN

      Disengage the 10 claws and clip.

    2. Disconnect the connector and remove the upper console panel sub-assembly.

  5. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01G58U

      Disconnect the connector.

    2. Disengage the clamp and remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.