ELECTRICAL KEY OSCILLATOR (for Luggage Compartment) INSTALLATION


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A01G8SXE01
      Text in Illustration
      *A Double-sided Tape Size
      *a Guide of Application Area
      A01G6V4 Double-sided Tape

      Peel off the release paper from new double-sided tape, and apply the new double-sided tape to the position indicated in the illustration. Be careful not to touch the adhesive surface.

      Standard Dimension
      Area Dimension
      a 3.0 mm (0.118 in.)
      b 15.0 mm (0.591 in.)

    2. Engage the 2 fasteners and attach the double-sided tape to install the front luggage compartment trim cover.

    3. Install the 2 clips.

  3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. Install the 3 clips.

    2. Engage the 2 fasteners and install the luggage compartment inner trim cover LH.

  4. INSTALL ROPE HOOK (for LH Side)


    1. A01G7UN

      Engage the 2 claws and install the rope hook.

  5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  6. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)


    1. Install the 3 clips.

    2. Engage the 2 fasteners and install the luggage compartment inner trim cover RH.

  7. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)


    1. Install the 2 clips.

    2. Engage the 4 fasteners and install the luggage compartment inner trim cover RH.

  8. INSTALL ROPE HOOK (for RH Side)


    1. A01G6P0

      Engage the 2 claws and install the rope hook.

  9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)


    1. Engage the guide.

    2. Install the luggage hold belt striker assembly with the bolt.

  10. INSTALL SPARE WHEEL COVER PAD LH


    1. Install the No. 2 spare wheel cover pad LH.

  11. INSTALL SPARE WHEEL COVER PAD RH


    1. Install the spare wheel cover pad RH.

  12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.