ELECTRICAL KEY OSCILLATOR (for Luggage Compartment) REMOVAL


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  2. REMOVE SPARE WHEEL COVER PAD LH


    1. Remove the spare wheel cover pad LH.

  3. REMOVE SPARE WHEEL COVER PAD RH


    1. Remove the spare wheel cover pad RH.

  4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. A01G8GX

      Remove the bolt.

    2. Disengage the guide and remove the luggage hold belt striker assembly.

  5. REMOVE ROPE HOOK (for LH Side)


    1. A01G9HY

      Disengage the 2 claws and remove the rope hook as shown in the illustration.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. A01G8WR

      Using a clip remover, remove the 3 clips.

    2. Disengage the 2 fasteners and remove the luggage compartment inner trim cover LH.

  7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)


    1. A01G5E4

      Remove the bolt.

    2. Disengage the guide and remove the luggage hold belt striker assembly.

  8. REMOVE ROPE HOOK (for RH Side)


    1. A01G4GB

      Disengage the 2 claws and remove the rope hook as shown in the illustration.

  9. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)


    1. A01G8HD

      Using a clip remover, remove the 3 clips.

    2. Disengage the 2 fasteners and remove the luggage compartment inner trim cover RH.

  10. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)


    1. A01G4XE

      Using a clip remover, remove the 2 clips.

    2. Disengage the 4 fasteners and remove the luggage compartment inner trim cover RH.

  11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A01G4BNE01
      Text in Illustration
      *1 Fastener
      *2 Double-sided tape

      Using a clip remover, remove the 2 clips.

    2. Disengage the 2 fasteners and detach the double-sided tape, and remove the front luggage compartment trim cover.

  12. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01G60J

      Disconnect the connector.

    2. Disengage the clamp and remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.