THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Engine switch/ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      IG SW Engine switch/ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off or on (ACC)

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH/ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH/ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Trunk Lock/Unlock SW Luggage door unlock switch/ON or OFF

      ON: Luggage door unlock

      OFF: Luggage door lock

      		 -
      FR Door Lock Pos Front door RH unlock detection switch/LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH/ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch/LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH/ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch/ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch/ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH or LH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch/ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH or RH locked

      		 -
      Luggage Courtesy SW Luggage compartment door courtesy switch/ON or OFF

      ON: Luggage compartment door open

      OFF: Luggage compartment door closed

      		 -
      Intrusion Sens OFF SW*1 Intrusion sensor cancel switch/ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: intrusion sensor cancel switch off

      		 -
      Intrusion Sensor*1 Status of the intrusion sensor (theft warning ultrasonic sensor) detection/ON or OFF

      ON: intrusion sensor (theft warning ultrasonic sensor) detecting intrusion

      OFF: intrusion sensor (theft warning ultrasonic sensor) not detecting intrusion

      		 -
      Intrusion Sen Conn*1 Intrusion sensor connecting/ON or OFF

      ON: Intrusion sensor connected

      OFF: Intrusion sensor not connected

      		 -
      Intrusion Sensor Sound Detect*1*2*3 State of the intrusion sensor sound detection/ON or OFF

      ON: Sound detected

      OFF: Sound not detected

      		 Only displays "ON" on the Data List once. When checking again, disconnect and reconnect the GTS.

      • *1: w/ Intrusion Sensor Cancel Switch

      • *2: w/o Door Ajar Warning Buzzer Function

      Note

      *3: Perform the intrusion sensor operation inspection with the GTS disconnected Click here.

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the GTS.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Horn2*1 Theft warning siren OFF/ON -
      Vehicle Horn Vehicle horns OFF/ON -
      Security Horn*2 Security horn OFF/ON -
      Power For Intrusion Sensor*1 Intrusion sensor (theft warning ultrasonic sensor) power supply OFF/ON -

      • *1: w/ Intrusion Sensor Cancel Switch

      • *2: w/o Intrusion Sensor Cancel Switch

      Entry&Start
      Tester Display Test Part Control Range Diagnostic Note
      Immobiliser Indicator Security indicator light OFF/ON -