DOOR CONTROL TRANSMITTER INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. A01G9HV

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01G9CB

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A01G6VP

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when a switch is pressed.

    2. for Type B:


      1. A01G8QT

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01G6X5

        Engage the 2 claws to install the transmitter battery housing cover.

      3. A01G76K

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. A01G6A0

        Insert the mechanical key into the transmitter.

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when a switch is pressed.