LUGGAGE COMPARTMENT DOOR LOCK INSPECTION


  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. Check the operation of the door lock motor.


      1. A01G6JYE07
        Text in Illustration
        *a

        Component without harness connected:

        (Luggage Compartment Door Lock Assembly)
        *b Close (Lock)
        *c Open (Unlock)

        Move the door lock to the close (lock) position.

      2. Apply battery voltage to the door lock motor and check operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (B)

        Battery negative (-) → 2 (E)

        		 Luggage compartment door lock motor open (unlock) operation

        If the result is not as specified, replace the luggage compartment door lock assembly.

    2. Check the operation of the door courtesy switch.


      1. A01G6JYE08
        Text in Illustration
        *a

        Component without harness connected:

        (Luggage Compartment Door Lock Assembly)
        *b Close (Lock)
        *c Open (Unlock)

        Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Condition Condition Specified Condition
        2 (E) - 3 (D+) Close (Lock) 10 kΩ or higher
        2 (E) - 3 (D+) Open (Unlock) Below 1 Ω

        If the result is not as specified, replace the luggage compartment door lock assembly.