CHARGING SYSTEM Charge Warning Light Comes ON while Driving

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK LOCK FUNCTION OF GENERATOR PULLEY WITH CLUTCH


    1. Check the lock function with the generator pulley with clutch installed in the vehicle.


      1. Visually check that the rotor in the generator assembly operates with the engine running.

    2. Check the lock function with the generator pulley with clutch removed from the vehicle.


      1. Remove the generator pulley cap.

      2. A01G9QBE03
        Text in Illustration
        *a Free
        *b Lock

        Hold the center of the generator pulley with clutch, and confirm that the outer ring turns counterclockwise and does not turn clockwise Click here.

        OK
        The outer ring turns counterclockwise and does not turn clockwise.
      SST
      09820-63021

    NG

    REPLACE GENERATOR PULLEY WITH CLUTCH Click here

    OK

  2. CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH


    1. Start the engine and visually check the generator pulley with clutch for looseness.

      OK
      The generator pulley with clutch is not loose.

    NG

    TIGHTEN GENERATOR PULLEY WITH CLUTCH TO THE SPECIFIED TORQUE

    OK

    REPLACE GENERATOR ASSEMBLY Click here